Introduction of saving-energy ball press machine:
The host was powered by the electromagnetic adjustable-speed motor,the pulley,spur gear reducer, coupling with spread through the rod axis.Driving shaft and the driven shaft through the exposed gear to ensure synchronous operation. Behind the passive bearing equipped with a hydraulic device.Screw feeding device consists of electromagnetic speed motor drive pulley,worm gear rotation,the material will be pressure to force in to the inlet.Because electromagnetic governor motor constant torque characteristics,when the pressure feeding screw feeder amount of material required and the host are equal, you can maintain a constant feed pressure to pellet quality. If the feed is too large,the feeding device electrical overload;feed rate is too small can not be a ball.Therefore,the skilled technique is key to ensure the roll ball press machine to work normally.
Structure of saving-energy ball press machine:
Mainly to achieve dosing to ensure that material evenly into rolls.Screw feeding device driven by electromagnetic adjustable speed motor, the belt wheel, the worm reducer rotating pressure,will be forced into the material feeding port Because electromagnetic governor motor constant torque characteristics, when the pressure feeding screw feeder amount of material required and the host are equal,you can keep feeding pressure constant so that the pellet quality stability. If the feed is too large, the feeding device electrical overload; feed rate is too small to a ball.Thus the skilled operation skill is the important condition to guarantee the normal work of the pressure ball.
Main drive is: motor - reducer triangle strips-reduction box-exposed gear-roller.The host was powered by the electromagnetic adjustable speed motor, the belt pulley, cylindrical gear reducer, to the drive shaft by pin coupling. The driving shaft and the driven shaft through a gear to ensure the synchronous operation. Passive bearing seat behind a hydraulic device. Hydraulic protection device is composed of a hydraulic pump pressure oil into the cylinder, the piston axial displacement. The piston rod of the front connecting head on the bearing seat in order to meet the requirements of production pressure.
Mainly refers to the main engine,hard core is roller.When the two roller feed too much or into the metal block, the piston rod of the hydraulic cylinder pressure overload, hydraulic pump will stop,the accumulator on pressure change plays a buffer role,the relief valve opens the oil return, the piston rod so that the pressure roller gap increasing shift to hard objects through a pressure roller,pressure recovery system normal,can protect the roller not damaged. The machine can adjust the pressure according to the density,the production of flexible.
Main Technical Datas of Energy-saving Ball Press Machine:
Remark: Energy-saving ball press machine must have a more balanced base,note correction levels,level up gap.Corollary equipment of converyor should corresponding to the converyor.After finsh the installation,strict checks whether the components are securely connected,check the machine whether placed debris,plus two full reducer and gearbox oil,to determine each part is correct before test machine.Test machine to see wheather reversed,if the direction is correct idling thirty minutes to see if there is abnormal sound components or fever, identify problems solved in time,everything is normal to prepare 300 kg dry material (without moisture coal, sand or refractory sub-material),for dry grinding polishing, about five times,you can make a formal production. Please note: Moisture content has a great influence on ball pressure and release, we must grasp, it is best to dry the wet,no loaded car start. In the initial stage after the normal production must have a person to monitor,prevent the parts bolt looseness,if you found some problems please immediately shut down, lubricating oil reducer and gear box,after the run-in period the worker should replace with new gear oil.